QuoteReplyTopic: Potential damage from fusion bonding! Posted: May 21 2006 at 9:17am
I have found a freelance hair extensionist that seems really
professional and I am going to a consultation with her this week. ( I’m not
sure whether I can send a link to her website or not!!)
I have posted previously that I have extremely fine hair and am worried mainly
about damaging it, but I really want nice hair and I believe that extensions
are the only way. I am either going to attempt attaching wefts using protac (a
bit worried about DIY!) or go to someone.
This is the system she uses
"The method I do essentially does use a 'glue' - but it is the placement
that prevents damage. Essentially every method out there - except weaving -
uses heat or melting for application. Some methods say they don't use a glue
but a resin - at the end of the day if its a runny liquid that is sticky - its
glue. I've attached a pic of the bonds so you can see what I'm talking about.
Each section is triangular - which means you have an even weight distribution.
I can guarantee the application will not lead to damage ( speak to my clients
if you wish!) the only way it can all go wrong is if you decide you're not
going to look after them! - all information you will get in the consultation
anyhow......"
Does this sound like a good or bad idea??
I am so desperate to have hair extensions, but I really don't want to rush into
it, I’m worried my desire for nice hair will cloud my judgment.
Thank you again guys!
Kalika
Members Profile
Send Private Message
Find Members Posts
Add to Buddy List
Senior Member
Joined: January 09 2005
Status: Offline
Points: 1218
As with almost any extension system, the skill of the stylist/how you care for the extensions/the removal will play a bigger part in your hair health then the extension method. Ive seen no damage with fusion, Ive seen a LOT of damage with fusion, Ive seen no damage with sew ins, Ive seen a LOT of damage with sew ins. There's just too many variables.
And triangular sectioning helps hide the bonds better IMO
sherrie215
Members Profile
Send Private Message
Find Members Posts
Add to Buddy List
Super Elite Member
Joined: December 21 2004
Status: Offline
Points: 4424
I agree with Kalika. Every method has the potential for damage. And alot depends on the skill of the stylist in both the installation and removal procedure.
At least this stylist is being honest and saying its glue, unlike alot of stylists who try to tell you its not glue....glue is glue by whatever other words they use to describe it!
The stylist said that 'essentially every method uses heat or glue'... that's not true. Apparently she doesn't know how to use microlinks. They are much better than glue anyway, in my opinion.
I have to agree that it really depends on a lot of things as to how much damage is done to your hair. I have very fine thin hair also and first two installs were with great lengths the first removal of them caused a lot of breakage to my real hair. The second removal went ok, did not notice any breakage.
Third install was with a glue method, that made a real mess taking them out, left a lot of residue that took me forever to get out of my thin hair. Fourth install was with the d-lux hair fusion....those came out like a breeze...much easier than the great lengths.
I get more breakage from my hair getting dry and brushing it inproperly, so I would have to say that the most of my damage has come from my poor care of them. I am getting better though thanks to this board!
I guess there are always factors, but if she is a good stylist then there should be no damage, right?
She claims she was a former Technical Director for one of
the leading Hair Extension product/training suppliers and has
been a Head Educator in extensions for some time. I guess I will check this out at the consulatons stage.
The system that she has suggeted is the traditional fusion bonds, with I think its either european or bohyme remi hair.
What things do you think I should check out when I go for the consulation?
I have heard that microlinks can be damaging on realy fine hair though, is this true Metalgirl?
I also have not seen any salons that do this type of extension in the London area, I've heard Amanda (posts on this forum!) is good, but she is all the way in Mansfield!
I do not think microrings cause damage when done properly. I exclusively use the silicone lined microrings. It is coated with silicone on the inside of the ring that acts as a cushion between your hair and the metal. The silicone also prevents slippage.
If those features aren't good enough, the removal process is hands down much easier than with any kind of fusion. Just use the pliers to pop the ring back open and your done. No glue to break down, no solvents, so sticky residue to get out of the hair.
In my opinion, most damage from fusion occurs in the removal. Many of the fusion glues do not come out as easily as the extensionist/extension company tells you that it will. Trust me, I have spent hours trying to get fusion glue out of client's hair. It's not fun.
It does sounds really good, I was just under the impression that the weight is too much for extremely fine hair! These ease of removal sounds fantastic though.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum
Topic Options
Post Options
Thanks(0)
