Print Page | Close Window

Cool v. Hot for Synth Styling

Printed From: HairBoutique.com
Category: Hair Extension Topics
Forum Name: Hair Extensions
Forum Description: Hair Extensions can be the quick fix for short hair.
URL: https://talk.hairboutique.com/forum_posts.asp?TID=20014
Printed Date: November 04 2025 at 1:08pm


Topic: Cool v. Hot for Synth Styling
Posted By: Jenny_RR
Subject: Cool v. Hot for Synth Styling
Date Posted: January 21 2005 at 6:46am
OK, so for all of us who are experimenting with our new synth hair, I've been doing some more reading, and I think the ability to curl the Dome, ProStyles, or PH depends on the ability to cool it in the same position. So, hot rollers or steam rollers would work--as long as they're allowed to dry in the same position--whereas a curling iron would not.

On Bridget's site, it says: "Hot rollers work well and will provide a long holding curl if you allow them to cool completely before taking down. Use a curler one size smaller than the finished curl size you desire"; and
"When using a blow dryer it is best to use the
warm setting with a diffuser. Use the cold setting on the dryer to set a blow dry style. Avoid pulling your extensions with the brush when they are
warm."

Does this sound correct? Can anyone who's worn or used synth hair verify this?

:)

-------------
http://www.beautyaddictmag.com - www.beautyaddictmag.com



Replies:
Posted By: sherrie215
Date Posted: January 21 2005 at 6:50am
Jenny that might be a good post for Quinnsters board too. Since there are alot of synthetic users there

-------------
www.hairextensions101.com - www.hairextensions101.com
www.mybeautyaddiction.com - www.mybeautyaddiction.com


Posted By: Jenny_RR
Date Posted: January 21 2005 at 6:52am
Gotcha! Will re-post over there! :)

-------------
http://www.beautyaddictmag.com - www.beautyaddictmag.com


Posted By: metalgirl
Date Posted: January 21 2005 at 10:51am
I know that when I worked at a place that did men's hairpieces, we used a steamer to curl the synthetic hair. There are two ways to do this:

Wrap the hair in whatever roller size you want, and then we would steam it. The steamer was one of those big commercial ones that dry cleaners use. I do think they make smaller, cheaper ones for home use to steam clothes. Steam curlers would also work, I bet.

Another way to do it (at least with hairpieces) is to use a very cheap curling iron set on low heat. You take your section of hair you want to curl, and you mist it with water from a spray bottle and then curl for a few seconds with your low heat iron.

If we wanted to perm the hairpiece, we'd wrap it in perm rods, and then let very hot tap water run over it for a good five minutes.

With all methods, let the curl cool down completely before you take out the roller. If you're doing the iron technique, once you take the iron out of your section, don't distrub the curl until it cools completely.


Posted By: EmmaSkye
Date Posted: January 21 2005 at 2:33pm
What metagirl said is all true. I think the best method to curl synth would involve water of some kind. I have a friend that makes dolls and I do the fancy hair for them and I wrap the hair with tiny perm rods and then dunk them in boiling water for about 30 seconds and then into cold water for another 30 seconds then since its a doll I let them set overnight. So for synth on a human head, some type of steam is needed to set the curl. Steam hot rollers I would think is the best bet, since you can set your hair, then go about your business and let them cool down.

-------------
SHE human hair blend, 18", #4 with Supertape.


Posted By: Jenny_RR
Date Posted: January 21 2005 at 6:07pm
Thanks, girls. Looks like I'm getting some steam rollers! :)

-------------
http://www.beautyaddictmag.com - www.beautyaddictmag.com


Posted By: sherrie215
Date Posted: January 21 2005 at 6:18pm
Hmmmm interesting. My hot rollers worked very well with the prostyles. But I was concerned about the curl holding. So then maybe steam rollers will help 'set' the curl. Ok...I am grasping this concept! No type of curling iron I have tried has worked well on the prostyles. It did not work at all dry, It curled well wet, but I didnt like the looks of the ends of the hair. I think after a few times it would be fried.

-------------
www.hairextensions101.com - www.hairextensions101.com
www.mybeautyaddiction.com - www.mybeautyaddiction.com


Posted By: Jenny_RR
Date Posted: January 21 2005 at 6:20pm
Hmm...did you see Rae's response on Quinn's? She had a bit of a different take on it.

By the way, I just used that blue you sent me to put streaks in my boyfriend's hair. It looks awesome. Thanks, Sherrie!

-------------
http://www.beautyaddictmag.com - www.beautyaddictmag.com


Posted By: sherrie215
Date Posted: January 21 2005 at 6:51pm
Kewl.....does he like it? Is he a willing guinea pig? LOL

-------------
www.hairextensions101.com - www.hairextensions101.com
www.mybeautyaddiction.com - www.mybeautyaddiction.com


Posted By: Jenny_RR
Date Posted: January 21 2005 at 7:24pm
Yeah, he's fine. He has spiky, jet-black hair, so I cut up the ProStyles into little blue chunks and put in about 30 or so. I think I burned him once, but he'll be OK. (He has more hair than he knows what to do with, so even if there's damage, it's no big deal--I could cut off half his hair and he'd have enough--wish it were the same for me....). :)

-------------
http://www.beautyaddictmag.com - www.beautyaddictmag.com


Posted By: sherrie215
Date Posted: January 21 2005 at 8:30pm
I bet that blue looks really good with black hair! I done some on a girl with shorter dark brown hair and they looked awesome!

-------------
www.hairextensions101.com - www.hairextensions101.com
www.mybeautyaddiction.com - www.mybeautyaddiction.com


Posted By: Jenny_RR
Date Posted: January 21 2005 at 10:34pm
Yeah, it looks pretty cool. I think I want to add some other blues, too--like a dark navy blue and a purple maybe. I hope he doesn't end up looking like Bozo the Clown because of this hobby of mine.....

-------------
http://www.beautyaddictmag.com - www.beautyaddictmag.com



Print Page | Close Window