question about trimmers
Printed From: HairBoutique.com
Category: 360 Waves
Forum Name: Men's 360 Waves - Part II
Forum Description: About 360 Waves
URL: https://talk.hairboutique.com/forum_posts.asp?TID=38640
Printed Date: November 09 2025 at 4:43am
Topic: question about trimmers
Posted By: liltmac
Subject: question about trimmers
Date Posted: January 02 2006 at 9:11pm
|
wen u move the blade up and the trimmers get louder, does that mean its sharper? ------------- My waves are 720, you only 180 My name is liltmac aka lilkobe |
Replies:
Posted By: T foster 0202
Date Posted: January 02 2006 at 9:33pm
|
do you mean shape up trimmers? cause they dont have an adjustable? ------------- "Girls like them low cut ceasars and the deep waves" Became a vet 12/23/05 |
Posted By: liltmac
Date Posted: January 03 2006 at 8:20pm
|
yea. edging trimmers ------------- My waves are 720, you only 180 My name is liltmac aka lilkobe |
Posted By: P Street
Date Posted: January 03 2006 at 10:16pm
|
they should not get louder. what brand and model do you have? ------------- Neophyte no longer |
Posted By: liltmac
Date Posted: January 04 2006 at 11:23pm
|
andis ------------- My waves are 720, you only 180 My name is liltmac aka lilkobe |
Posted By: P Street
Date Posted: January 05 2006 at 9:55am
|
which andis, outliner, t-outliner or styliner? if it is the gray ones (outliner) you may have to tighten the screws inside or re-align the blade. make sure you oil the blade also. if it is the styliner, there are 3 screws inside, 2 on the bottom and 1 on top. you may have screwed the top screw to tight. loosen it a little. if that is the case, the motor is working hard but the blade isn't moving, resulting with the noise. also i believe the styliner has a screw on the side. you may have to turn it until the noise stops. play with them for a while because they should not be making a loud noise. ------------- Neophyte no longer |
Posted By: BIGGMike
Date Posted: January 05 2006 at 11:19am
|
No,they should not be making loud noise. Make sure they are oiled and the blade is lined up like it was when you bought it. Sometimes clippers have to be set slightly off center, either to the right or left. ------------- Look to the skies and keep your eyes on the prize! I been through Hell but, STILL I RISE! |
Posted By: rocawaves23
Date Posted: February 11 2006 at 4:23pm
| How come I can't get those fresh hairs, that are around my hair line, wit my andis outlinerII? Should I use a razor instead, or are they not sharp enough? |
Posted By: ButchBoi05
Date Posted: February 11 2006 at 4:38pm
|
use a safety razor. ------------- 
|
Posted By: rocawaves23
Date Posted: February 11 2006 at 5:02pm
|
like the cheap ones BIC?
|
ButchBoi05 wrote:Posted By: ButchBoi05
Date Posted: February 11 2006 at 5:07pm
|
auctually what i use are the razors for eyebrows they usually 99cent for a single one at the beauty supply.
http://shop.store.yahoo.com/buyinprivate/tinbraneysha.html - safety razor -------------
|
Posted By: dino
Date Posted: February 11 2006 at 6:55pm
take the corner of ur trimmers..and hit the loose hairs with them...and to make my hairline even freash i use a disposable razor |
Posted By: rocawaves23
Date Posted: February 11 2006 at 8:09pm
|
When I do the corner of the trimmer i still can't get those small hairs, so i'll prolly have to get da razor. After u done wit da razor u put rubbin alochol right? Do u do that the nex day too? |