Those bonds look awesome. Is that the machine on the right hand
side of the photo laying on the table?
So, it's about $600, $25-$35 a cartridge and how many strands will a
cartridge do? It won't do synthetic hair at all? Does it generate a lot
of noise? What kind of glue is used and is acetone used for removal?
If you need to redo a strand for whatever reason, how easy is it to
remove the bond right after it's installed?
Amanda , Is Darren the person you purchased from. How much are they? I
emailed fast beauty and I was quoted $600 and $35 per cartridge. Is
that a decent price?
I've not done a lot of fusion to be honest but it usually takes me around ten minutes with shrinkies to do the section that I did and it took me 9 cos my hubby timed me x Its just grab your strand and press and roll, its sooo easy, I would recommend everyone to get these, I think I would even feel confident doing the back of my own head with this machine, I think I'd pre-bond first and then use the machine though on myself x Thanks so much Darren xxx
Hey, there it is on the right hand side in the second picture he he its not half as big as I thought it was going to be. Another point, there is initial shedding with the hairs that weren't properly coated but this seemed to calm down. I think with this method you will get shedding but I think it will be somewhere inbetween shrinkies and fusion, not as little shedding as shrinkies but no where near fusion shedding xx
Here are the pictures of my first practice. Oh hi Stan by the way. I feel pretty confident already that I can use it so I'm going to do my first client Saturday. This machine is really really easy to use. I used loose hair and used it using the black side (mine's black) facing me. Removal is an absolute breeze, I couldn't believe how hard wearing and tough the bond felt and how easy it came out. Its like fusion without all the mess. The only thing I found was that I had to double coat these strands xx
It seems that she prefers EM after all. She says that in comparison to the pre-bonded hairs that she tried, the EM glue is more soft and bendable, more comfortable {which means she didn't need to take pain killers} and more invisble than the rest. And lastly, the glue, regardless how thin, is very durable. Easy removal is a big plus too.
Hello Development- welcome! Could you please share some info about your experiences with this machine- tips on proper installation, cleaning, any tips you can share would be extremely helpful. Have you tried this machine installing wefts, integrations, etc... How many heads can you average about with 1 cartridge? How long does it take you to do a full head? Have you tried this with synthetic hair? Also post some pictures, so we all can see the inside of your work. We have not received hands on training except for a Korean-English DVD. Most of the girls are not familiar with doing fusion. Please, anything you can provide would be very, very helpful and extremely appreciated.
I think you just need to clean it while using it while doing a full head.
OMG!!! Girl- welcome back!!! Yup, I agree. I clean all my current machines like the Great Lengths too. I'm playing it safe by just doing some f/x right now. Soon I'll graduate to the full heads!
Lisa- try hold the strands at 12:00, this way you can get really close and invert the machine.
I did a few pieces with EM on a girl that I did pinchbraids on two
weeks ago. Using both ways, some without pre-bonding the hair and some
with pre-bonding the hair first and then attaching with the EM machine.
And I didn't even wash her hair first(it was dirty). I emailed her a
week ago asking if she had any problems, and so far no news(she would
tell me if they came out). I am thinking no news is good news.
And I also used EM to prebond hair before using pro-tubes, and it was
really easy. That was two weeks ago and no complaints. But the machine
did jam up on me two times during that process. I think you just need
to clean it while using it while doing a full head.
I do think this will become faster as I get more familiar with it.
Char, I'm not getting the inverted gun thing. I tried to do it like that, but it was not working for me. I think with the blue cover facing me, that I was able to get pretty close to the root for the most part.
I think I like this method. It just depends on how it holds up over the course of 12 weeks. I have a couple other girls in the salon who want to be guinea pigs, so I'll get more practice.
I didn't take pictures of last night's install because we didn't get done with it until 11:30PM (we got a late start). The install was done on a stylist where I work, so I'll take a picture of the bonds when I see her next and post it.
For these pics, I used all loose hair. I determine the amount of
strand, cut the to even, align to the natural hair, close the
machine {inverted}, turn the strand left and right to coat enough
glue, push the machine up towards the scalp a bit to coat the
top, release the machine, then press or roll together.
Metal- I find that if you use a lot of hair then you need a lot of
glue. I try to make thinner strands. It just needs one coat! Prebonding takes too, too long. I bought this machine for
speedier installs
I also tired it with the eurolocs hair {stick hair}- so far so good-
but we'll see...
-Char
PS. I'm still in the lab with these, so I'll keep you all posted.
So what's your honest opinion after doing it Metalgirl I've managed to knock my UK supplier down so I'm getting one next week hopefully xx Do you think you'll get quicker than 5 hours and did you get as close and did they look as good as Char's, also did you press or roll xx Well done anyway girl!x
I used a 4 ounce weft of bohyme that I cut hairs off of to install loose as I went. It took 5 hours for me to do.
Lynn74- My experience has not been good with this machine and synthetic hair, either monofiber or thermofiber. What has happened with both types of hair is that when they are heated by the machine, the fake hair gets too hot and it melts the tape. When the tape melted ( I didn't realize it initially) , as I did a few more strands and the tail of the tape in the cartridge got all tangled up in one of the gears, making it so the machine would not advance the tape anymore. Basically it breaks the tape cartridge and at $25 each, that's not cheap. I wasted 2 tape cartridges by trying to use synthetic fibers with this system.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum
Topic Options
Post Options
Thanks(0)
This is just the beginning and more FUN is coming up!!! You'll be doing reusables, bald spots, more to come!!!
juliejetson wrote:
)
